Pla-Stick is designed to create a bond for painting substrates such as Polypropylene, Polypropylene/Elastomer Blends, Polyethylene, TPO and others. Pla-Stick is clear in color, ready to spray (no mixing required) and extremely easy to apply; dries in 2 to 3 minutes.

Buy Pla-Stick

Simply click on the product you would like to purchase from the list below and you will be taken to a screen where you can place your order. Then proceed to checkout or return to this screen if you would like to continue shopping.

How To Apply Pla-Stick:

Step 1 - Clean substrate of all contamination, such as grease, dirt and oils using isopropyl alcohol/detergent or other appropriate cleaning solutions.

Step 2 - Pla-Stick is ready to spray as packaged, no reduction is needed. Apply one medium coat of Pla-Stick with a dry film thickness of 0.1 to 0.2 mils using standard spray equipment.

NOTE: Proper coat thickness is critical for good adhesion properties. With adhesion promoters, more is not better. Carefully monitor coat thickness. Basecoats or primers may be applied immediately after the Pla-Stick coat has dried, usually within 2 to 3 minutes at temperatures 70° F or above. Pla-Stick acts as an adhesive to the plastic providing a bond.

Step 3 - Clean equipment thoroughly with thinner.